LIFT TABLE POWER UNITS 03
Marking: Non-standard (special-shaped) hydraulic power unit customized
Product introduction
Designed exclusively for lift tables , this power unit consists of high pressure gear pump , AC motor , multi-functional manifold , valves , tank , etc . Start the motor to fulfill the lifting function while the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve
OUTLINE DIMENSION：
HYDRAULIC CIRCUIT DIAGRAM
MODEL SPECIFICATIONS
|
Model |
Motor Voit |
Motor Power |
Rated Speed |
Displacemea |
System Pressure |
Taak Capacity |
Solenoid Valve Voit |
L(mm) |
|
ADPU5-F2.1B3G2/LBUAN1 |
220VAC |
1.5KW |
1450RPM |
2.1ml/r |
20MPa |
5L |
12VDC |
627 |
|
ADPU5-F2.7B3G2/LBUBN1 |
2.7ml/r |
20MPa |
6L |
24VDC |
672 |
|||
|
ADPU5-E3.2C3G2/LBUCN1 |
3.2ml/r |
12MPa |
8L |
24VAC |
777 |
|||
|
ADPU5-F2.1C4H2/LCUDN1 |
380VAC |
2.2KW |
2850RPM |
2.1ml/r |
20MPa |
8L |
110VAC |
777 |
|
ADPU5-F2.7D4H2/LCUEN1 |
2.7ml/r |
20MPa |
10L |
220VAC |
867 |
|||
|
ADPU5-E3.2E4H2/LCUEN1 |
3.2ml/r |
16MPa |
12L |
220VAC |
887 |
|||
| Remark:1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity. 2.The manual override function is available on request. 3.60HZ motors with CSA or UL ce「仙cation are available upon request |
||||||||
SPECIAL NOTES
1 . The power unit is of S 3 duty , which can only be worked intermittently , ie . 1 minute on and 9 minutes off.
2 . Clean all the hydraulic parts concerned before mounting the power unit.
3 . Viscosity of the hydraulic oil should be 15-68 cst , which should also be clean and free of impurities . N46 hydraulic oil is recommended.
4 . Oil changing is required after the initial 100 operation hours , afterwards once every 3000 hours
5 . The power unit should be mounted horizontally
