FORK LIFT POWER UNITS 05
Marking: Non-standard (special-shaped) hydraulic power unit customized
Product introduction
Equiped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and a tank,ect., this power unit is a typical power up gravity down hydraulic system. Start the motor to lift the machine and the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve.
OUTLINE DIMENSION：
HYDRAULIC CIRCUIT DIAGRAM
MODEL SPECIFICATION
|
Model |
Motor Voit |
Motor Power |
Rated Speed |
Displacemea |
System Pressure |
Taak Capacity |
Solenoid Valve Voit |
|
ADPU5-F2.5B2B2/WUDBT1 |
24VDC |
3KW |
2500RPM |
2.5ml/r |
20MPa |
6L |
24VDC |
|
ADPU5-F2.7B2B2/WUDBT1 |
|
|
|
2.7ml/r |
|
|
|
|
ADPU5-F3.2B2A2/WUDBT1 |
|
|
|
3.2ml/r |
|
|
|
Remark:
1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity
2.The manual override function is available on request.
SPECIAL NOTES
1.The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of impurities.N46 hydraulic.
4.oil is recommended.4.Check the oil level in the tank after the in the ialoperation of the power unit.
5.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
