FORK LIFT POWER UNITS 04
Marking: Non-standard (special-shaped) hydraulic power unit customized
Product introduction
Equiped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and a tank, ect. This power unit features power up gravity down actions. Start the motor to lift the machine and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. The products are widely used in the industry of logistic devices such as fork lift, mini lift table etc.
OUTLINE DIMENSION：
HYDRAULIC CIRCUIT DIAGRAM
MODEL SPECIFICATIONS
|
Model |
Motor Voit |
Motor Power |
Rated Speed |
Displacemea |
System Pressure |
Taak Capacity |
Solenoid Valve Voit |
|
ADPU5-F1.2B1W2/WUAAD9 |
12VDC |
1.5KW |
2500RPM |
1.2ml/r |
20MPa |
6L |
12VDC |
|
ADPU5-F1.6B1W2/WUAAD9 |
|
|
|
1.6ml/r |
|
|
|
|
ADPU5-F2.7B2A2/WUABD9 |
24VDC |
2.2KW |
|
2.7ml/r |
|
|
24VDC |
|
ADPU5-F2.5B2A2/WUABD9 |
|
|
|
2.5ml/r |
|
|
|
| Remark:1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity 2.The manual override function is available on request. |
|||||||
SPECIAL NOTES：
1. The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5.The power unit should be mounted horizontally
