FORK LIFT POWER UNITS 03
Marking: Non-standard (special-shaped) hydraulic power unit customized
Product introduction
Consisting of high pressure gear pump,DC motor, multi-functional manifold, valves and tank. this power unit has been widely used in the industry of logistic devices such as fork lift, m巾i lift table and scissors lift. The lowering movement is controlled by the solenoid valve with the lower speed controlled by adjustable throttle valve. The needle release valve is used for lowering movement in case of power failure
HYDRAULIC CIRCUIT DIAGRAM
MODEL SPECIFICATIONS
|
Model |
Motor Voit |
Motor Power |
Rated Speed |
Displacemea |
System Pressure |
Taak Capacity |
Solenoid Valve Voit |
L(mm) |
|
ADPU5-F1.2A1W2/WUAAD9 |
12VDC |
1.5KW |
2500RPM |
1.2ml/r |
20MPa |
3.5L |
12VDC |
411 |
|
ADPU5-F1.6B1W2/WUAAD9 |
|
|
|
1.6ml/r |
|
5L |
|
464 |
|
ADPU5-F2.1B1W2/WUAAD9 |
|
|
|
2.1 ml/r |
|
5L |
|
461 |
|
ADPU5-F2.1B2A2/WUABD9 |
24VDC |
2.2KW |
|
2.1 ml/r |
|
6L |
24VDC |
511 |
|
ADPU5-F2.5C2A2/WUABD9 |
|
|
|
2.5ml/r |
|
8L |
|
581 |
|
ADPU5-F2.7C2A2/WUABD9 |
|
|
|
2.7ml/r |
|
8L |
|
581 |
| Remark: | ||||||||
| 1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity | ||||||||
| 2.The manual override function is available on request. | ||||||||
SPECIAL NOTES
1.The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5.The power unit should be mounted horizontally.
