FORK LIFT POWER UNITS 01

Short Description:


Product Detail

Product Tags

Marking: Non-standard (special-shaped) hydraulic power unit customized

PRODUCT INTRODUCTION

Equiped with a high pressure gear pump,a DC motor.a multi-functional manifold,valves and a tank etc. This power unit features power up gravity down function. Start themotor to lift the machine and the lowering movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. Products of this series can be widely used in the industry of logistic devices such as fork lift, mini lift table etc.

OUTLINE DIMENSION

download_01

HYDERAULIC CIRCUIT DIAGRAM

download_02

Model

Motor Voit

Motor Power

Rated Speed

Displacemea

System Pressure

Taak Capacity

Solenoid Valve Voit

L(mm)

ADPU5-F1.2A1W2/WUAAD9

12VDC

1.5KW

2500RPM

1.2ml/r

20MPa

3.5L

12VDC

409

ADPU5-F1.6B1W2/WUAAD9

1.6ml/r

5L

459

ADPU5-F2.1B1W2/WUAAD9

2.1 ml/r

5L

459

ADPU5-F2.1B2A2/WUABD9

24VDC

2.2KW

2.1 ml/r

6L

24VDC

509

ADPU5-F2.5C2A2/WUABD9

2.5ml/r

8L

579

ADPU5-F2.7C2A2/WUABD9

2.7ml/r

8L

579

Remark:1.Please go to page 1 or consult our sales engi neer for the different pump displacement, motor power or tank capacity.
2.The manual override function is available on request.

SPECIAL NOTES

1.The duty of this power unit is S3,i.e.,30 seconds on and 270 seconds off.
2.Clean all the hydraulic parts concerned before mounting the power unit.
3.Viscosity of the hydraulic oil should be 15-68 cst, which should also be clean and free of impurities.N46 hydraulic oil is recommended.
4.0il changing is required after the initial 100 operation hours, afterwards once every 3000 hours.
5.The power unit should be mounted horizontally.


  • Previous:
  • Next:

  • Write your message here and send it to us